您的位置: 首页 » 法律资料网 » 法律法规 »

中华人民共和国海关对进出上海外高桥保税区货物、运输工具和个人携带物品的管理办法(附英文)

时间:2024-04-29 11:43:51 来源: 法律资料网 作者:法律资料网 阅读:9982
下载地址: 点击此处下载

中华人民共和国海关对进出上海外高桥保税区货物、运输工具和个人携带物品的管理办法(附英文)

海关总署


中华人民共和国海关对进出上海外高桥保税区货物、运输工具和个人携带物品的管理办法(附英文)
海关总署


一九九0年九月八日国务院批准

第一章 总则
第一条 为了促进上海外高桥保税区的建设,发展外向型经济,根据《中华人民共和国海关法》以及国家其他有关法规的规定,制定本办法。
第二条 上海外高桥保税区(以下简称保税区)为海关监管区,海关在保税区内依法执行监管任务。保税区与非保税区(指中国境内的其他地区,下同)分界线设置完善的隔离设施。
第三条 进出保税区的货物、运输工具和个人携带物品,必须经由设有海关机构的出入口进出,如实向海关申报,接受海关检查。
保税区内从事进出口业务的企业和生产、仓储企业应当持上海市人民政府或者其指定的主管部门的批准文件向海关登记备案。
第四条 保税区进出口货物,应当由收货人、发货人或者他们的代理人填写进出口货物报关单,并按规定交验有关单证。
第五条 保税区内仅设立行政管理机构以及有关企业。
除安全保卫人员外,其他人员不得在保税区内居住。
第六条 保税区内行政管理机构和企业进口的供本机构、企业使用的货物仅限在保税区内使用,未经批准,严禁转让、销售非保税区。保税货物必须复运出境或经加工后复运出境。
如遇特殊情况需将货物转让、销售非保税区的,则视同进口,应交验国家规定的进口许可证,并缴纳进口关税和进口环节的产品税(增值税)或工商统一税。
第七条 在保税区设立国家限制和控制的生产项目,须经国家规定的主管部门批准。
第八条 国家禁止进出口的货物、物品不得运入、运出保税区。
目的在于销往非保税区的货物不得运入保税区。
第九条 海关对保税区进出口的货物及有关场所,有权按照《中华人民共和国海关法》的规定进行检查。

第二章 对进出口货物的验放依据及税收优惠
第十条 从境外进口运入保税区的供保税区内使用的机器、设备、基建物资、生产用车辆、交通工具和办公用品,为加工出口产品进口的原材料、零部件、元器件、燃料、包装物料,供储存的转口货物,以及在保税区加工运输出境的产品免领进出口许可证。
第十一条 从非保税区运入保税区的货物(包括供生产出口产品的原材料、零部件、元器件、包装物料等),视同出口,并按照国家有关规定办理海关手续。
第十二条 从非保税区运入保税区供区内行政管理机构、企业及其工作人员使用的国内生产的机器、设备和日常生活用品,使用单位应向海关申报,由海关查验后放行。从非保税区运入已办妥进口手续的进口货物、物品,不予退税。
第十三条 保税区的进出口货物,其关税和工商统一税(产品税或增值税),按以下规定办理:
(一)建设保税区内基础设施所需进口的机器、设备和其他基建物资,予以免税。
(二)保税区内企业进口自用的建筑材料、生产和管理设备、生产用燃料、数量合理的生产用车辆、交通工具、办公用品以及上述机器设备、车辆所需的维修零配件,予以免税。
(三)保税区内的行政管理机构进口自用合理数量的交通工具、办公用品、管理设备,比照本条第(二)项的规定办理。
(四)保税区内企业进口专为生产出口产品所需要的原材料、零部件、元器件、包装物料,予以保税。
(五)转口货物按保税货物处理,在复出口的条件下免税。
(六)进口本条第(一)至第(五)项规定范围以外的物品,应照章征税。
(七)保税区内企业生产加工的产品出口,免征出口关税和生产环节的工商统一税(产品税或增值税)。

第三章 对生产企业进出口货物的管理
第十四条 保税区内的生产企业应向海关备案,领取有关《登记手册》。
上述企业应对原材料、零部件、元器件及制成品等的进口、储存、出口、销售等情况,分别建立专门帐册,定期列表报送海关备查、核销。
第十五条 生产企业用进口料、件生产的制成品应全部销往境外。如遇特殊情况需将生产的制成品、副次品和边角余料等销往非保税区时,视同进口,应按国家有关规定办理进口手续并照章纳税。海关对制成品按所含进口料、件补征税款。发货人或者他们的代理人对所含料件品名、数
量、价值申报不清的,海关按照制成品补征税款。
第十六条 进口料、件应自进口之日起一年内加工成品销往中国境外,并在合同执行完毕后一个月内由生产企业持凭《登记手册》和经海关签印的出口货物报关单向海关办理核销手续。
超过一年未曾加工的进口料、件,除特准延期外,应按进口货物办理领证、纳税手续。

第四章 对外贸企业进出口货物的管理
第十七条 经国家主管部门批准经营进出口业务的保税区外贸企业可从事转口贸易和为保税区内企业代理进口生产用原材料、零部件和出口产品,但不得收购非保税区企业生产的货物出口,亦不得代理非保税区企业进口货物。
第十八条 保税区外贸企业进出口货物时,海关凭外贸和生产企业签订的代理进出口合同及其他有关单证验放。
第十九条 保税区外贸企业进口的货物应存入保税区内海关指定的仓库、场所,并建立专门帐册,定期列表报送海关核查。
第二十条 外贸企业代理进口的货物运交保税区内生产企业进行生产加工和代理生产企业出口产品时,买卖双方应持凭代理进出口合同向海关办理报关、结转和核销手续。
海关对生产企业结转的上述货物按本办法第三章的规定办理。
第二十一条 外贸企业代理进口的货物不得擅自转让、销售到非保税区。

第五章 对仓储企业转口货物的管理
第二十二条 从中国境外运入保税区的转口货物应存入保税区内海关指定的仓库、场所。未经海关许可,上述货物不得转让或出售。
第二十三条 转口货物经海关同意,可在仓库内进行分级、挑选、刷贴标志、改换包装等简单加工。
仓储企业应建立进口、库存、转口、销售等专门帐册,定期列表报送海关核查。
第二十四条 转口货物在保税区内储存期限为一年。如有特殊情况需要延期的,应向海关提出申请,但延长期限最多不得超过一年。逾期不运出的,由海关按照《中华人民共和国海关法》第二十一条的规定处理。

第六章 对运输工具和个人携带物品的管理
第二十五条 进出保税区的运输工具应由其负责人、所有人或者他们的代理人持上海市人民政府或者其指定的主管部门批准的证件办理登记备案手续。
第二十六条 运输工具进出保税区时应向海关申报,接受海关检查。
第二十七条 从保税区前往非保税区的运输工具和人员不得擅自载运、携带保税区内保税货物和用保税料、件生产的产品。

第七章 附则
第二十八条 保税区进口的减免税货物、保税货物的监管手续费,应当按照《中华人民共和国海关对进口减税、免税和保税货物征收海关监管手续费的办法》办理。
第二十九条 严禁利用国家给予保税区的优惠和便利条件进行走私违法活动。海关对保税区内发生的走私违法活动按照《中华人民共和国海关法》的规定处理。
第三十条 本办法由海关总署负责解释。上海海关可根据本办法制定实施细则,报海关总署批准后实行。
第三十一条 本办法由海关总署发布施行。(附英文)

MEASURES OF THE CUSTOMS OF THE PEOPLE'S REPUBLIC OF CHINA CONCER-NING THE ADMINISTRATION OF THE GOODS, MEANS OF TRANSPORT, AND ARTICLESCARRIED BY INDIVIDUALS TO BE BROUGHT INTO OR OUT OF THE BONDED AREA OFOUTER GAOQIAO IN SHANGHAI
[*1]

Important Notice: (注意事项)

英文本源自中华人民共和国务院法制局编译, 中国法制出版社出版的《中华人民
共和国涉外法规汇编》(1991年7月版).
当发生歧意时, 应以法律法规颁布单位发布的中文原文为准.
This English document is coming from the "LAWS AND REGULATIONS OF THE
PEOPLE'S REPUBLIC OF CHINA GOVERNING FOREIGN-RELATED MATTERS" (1991.7)
which is compiled by the Brueau of Legislative Affairs of the State
Council of the People's Republic of China, and is published by the China
Legal System Publishing House.
In case of discrepancy, the original version in Chinese shall prevail.

Whole Document (法规全文)

MEASURES OF THE CUSTOMS OF THE PEOPLE'S REPUBLIC OF CHINA CONCER-
NING THE ADMINISTRATION OF THE GOODS, MEANS OF TRANSPORT, AND ARTICLES
CARRIED BY INDIVIDUALS TO BE BROUGHT INTO OR OUT OF THE BONDED AREA OF
OUTER GAOQIAO IN SHANGHAI [*1]
(Approved by the State Council on September 8, 1990 and promul-
gated by Decree No. 13 of the General Customs Administration on September
9, 1990)

Chapter I General Provisions

Article 1
These Measures are formulated in accordance with the Customs Law of the
People's Republic of China and the provisions of other pertinent laws and
regulations promulgated by the State in order to promote the construction
in the bonded area of Outer Gaoqiao in Shanghai and develop the export-
oriented economy.
Article 2
The bonded area of Outer Gaoqiao in Shanghai (hereinafter referred to as
"the bonded area") is under the supervision and administration of the
Customs, and the Customs shall carry out the task of supervision and
administration in the bonded area according to law. On the demarcation
line between the bonded area and the non-bonded areas (i.e., the other
areas within the territory of China, the same below) shall be established
well equipped separation installation.
Article 3
Goods, means of transport, or articles carried by individuals entering or
leaving the bonded area must go through the entrance and exit of the
Customs establishments. They shall be declared at the Customs truthfully
and accept the inspection of the Customs. Enterprises engaged in import
and export business and enterprises engaged in production and storage
business in the bonded area, shall present document of approval, issued by
the Shanghai People's Government or by the competent authorities
designated by it, to the Customs for registration.
Article 4
With respect to import and export commodities in the bonded area, the
consignee, the consignor, or their agent shall fill in the declaration
form for import and export commodities, and present the relevant documents
in accordance with provisions.
Article 5
Within the confines of the bonded area, only the competent administrative
organs and relevant enterprises are to be established.
With the exception of the security personnel, no other personnel shall be
permitted to reside in the bonded area.
Article 6
Within the confines of the bonded area, goods imported by the competent
administrative organs or enterprises for their own use shall be used only
in the bonded area; these goods are strictly forbidden to be transferred
or sold in the non-bonded areas without approval. The bonded goods must be
re-transported out of the territory, or be re-transported after being
processed out of the territory.
If, under special circumstances, the aforesaid goods must be transferred
to, or sold in non-bonded areas, they shall be regarded as imported goods,
and the persons concerned shall present import licence as prescribed by
the State, and pay import duty and product tax in the link of import (i.e.
tax on added value) or consolidated industrial and commercial tax.

Article 7
The establishment of production of projects, in the bonded area, which are
restricted and controlled by the State, shall be approved by the competent
authorities prescribed by the State.
Article 8
Goods and articles, whose import and export are forbidden by the State,
shall not be brought into or out of the bonded area.
Goods intended to be sold in the non-bonded areas shall not be transported
into the bonded area.
Article 9
The Customs has the right to inspect, according to the provisions of the
Customs Law of the People's Republic of China, goods imported into or
exported from the bonded area and the sites connected with them.

Chapter II The Basis for the Inspection and Clearance of Imported and Exported Goods and the Preferential Treatment in Taxation

Article 10
Import or export licence shall be exempted in the following cases: the
importation into the bonded area of machinery, equipment, goods and
materials for capital construction, motor vehicles for production, means
of transport, and articles for office use, which are to be used within the
bonded area; the importation of raw and processed materials, spare and
component parts, primary parts, fuels, and packaging supplies needed for
processing export products; the transit goods for storage; and the
products processed in the bonded areas and destined for export.
Article 11
Goods (including raw materials, spare parts and components, primary parts,
and packaging supplies for the production of export products), transported
from the non-bonded areas into the bonded areas, shall be regarded as
export goods, and the Customs procedures shall be completed in accordance
with the pertinent provisions promulgated by the State.
Article 12
With respect to the domestically manufactured machinery, equipment and
articles for daily use, which are transported into the bonded area from
the non-bonded areas and are for the use by administrative departments,
enterprises and their personnel in the area, the interested units shall
declare at the Customs, which shall give clearance after inspection. As
regards those imported goods and articles transported into the bonded area
from the non-bonded areas and which have been cleared after going through
import procedures, the Customs duties already paid shall not be refunded.

Article 13
Customs duty and consolidated industrial and commercial tax (tax on
products, or tax on added value) on the import and export goods of the
bonded area shall be handled in accordance with the following provisions:
(1) the machinery, equipment, and other goods and materials for capital
construction needed for the construction of basic installations and
facilities in the bonded area shall be exempted from duty;
(2) the building materials, the equipment for production and
administration, the fuels for production, motor vehicles within reasonable
quantities for production, means of transport, articles for office use,
and the spare parts and fittings needed for the maintenance of the
aforesaid machinery, equipment and motor vehicles, which are imported by
enterprises in the bonded area for their own use, shall be exempted from
duty;
(3) the means of transport within reasonable quantities, articles for
office use, equipment for administration, imported by administrative
departments in the bonded area for their own use, shall be handled by
applying mutatis mutandis the provisions of Item (2) of this Article;
(4) the raw and processed materials, spare and components parts, primary
parts, and packaging supplies, imported by the enterprises in the bonded
area to be used for production of export products, shall be held in bond;
(5) transit goods shall be treated as bonded goods, and shall be exempted
from duty if they are to be re-exported;
(6) the importation of articles other than those within the scope as
prescribed in Items (1) through (5) of this Article, shall be taxed in
accordance with relevant regulations;
(7) the exportation of products processed by enterprises in the bonded
area shall be exempted from export duty and consolidated industrial and
commercial tax in the production link
(tax on products, or tax on added value).

Chapter III The Administration of the Import and Export Commodi- ties of Production Enterprises

Article 14
Enterprises destined for production in the bonded area shall register at
the Customs for the record, and obtain a "registration handbook".
The aforesaid enterprises shall set up specialized account books to keep
separate records of the importation, storage, exportation, and marketing
conditions of raw and processed materials, spare and component parts,
primary parts and finished goods; and submit periodical statements to the
Customs for future reference and for verification and cancellation.
Article 15
The finished products manufactured with imported raw materials and spare
parts by production enterprises shall all be sold abroad. If, under
special circumstances, it is necessary to sell finished products,
substandard products, and leftover bits and pieces of raw materials in the
non-bonded areas, such products shall be regarded as imported products,
the procedures for importation shall be completed in accordance with the
pertinent provisions of the State and duties be paid according to
regulations. The Customs shall, in accordance with the quantities of the
imported raw materials and spare and component parts of which the finished
products consist, levy duties on them. In the event that the consignors or
their agents cannot submit an accurate report on the names, quantities and
value of such raw materials and spare and component parts, the Customs
shall take the finished products as imported and levy duties as such.
Article 16
The imported raw materials and spare and component parts shall, within the
period of one year after their importation, be processed into finished
products and sold outside the Chinese territory; and the enterprise
concerned shall, within the period of one month after the completion of
the execution of the contract, approach the Customs for verification and
cancellation be presenting the "registration handbook" and the declaration
form for export commodities endorsed by the Customs.
In case the imported raw materials and spare and component parts are not
processed into finished products within one year, with the exception of
special approval for an extension, due procedures for obtaining a licence
and paying the duty as import goods shall be completed.

Chapter IV Administration of Commodities Imported and Exported by Foreign Trade Enterprises

Article 17
A foreign trade enterprise in the bonded area, which is approved by the
State competent authorities to conduct import and export business, may
transact transit trade and act as an agent for other enterprises in the
bonded area to import raw and processed materials and spare and component
parts for production, or to export products. However, it may not purchase
goods manufactured by enterprises in the non-bonded area; nor may it act
as an agent for enterprises in the non-bonded area to import goods.
Article 18
When a foreign trade enterprise in the bonded area conducts import and
export of goods, the Customs shall give clearance after verifying the
import and export agency contract signed between the foreign trade
enterprise and the interested production enterprise, and other relevant
documents.
Article 19
Goods imported by a foreign trade enterprise in the bonded area shall be
stored in the warehouses and sites designated by the Customs within the
bonded area, and the aforesaid enterprise shall keep specialized account
books, and submit periodical statements to the Customs for verification.
Article 20
When a foreign trade enterprise delivers goods, imported by it as an
agent, to a production enterprise for processing, or exports goods as an
agent for the production enterprise, both buying and selling parties
shall, by presenting the import and export agency contract to the Customs,
go through the procedures for Customs declaration, carrying-over of
accounts, and verification and cancellation.
With respect to the aforesaid goods carried over by the production
enterprise, the Customs shall handle the matter in accordance with the
provisions in Chapter III of these Measures.
Article 21
Goods imported through the agency of a foreign trade enterprise shall not
be transferred or sold to the non-bonded areas without authorization.

Chapter V Administration of Warehousing and Storing Enterprises for Transit Goods

Article 22
Transit goods imported from abroad into the bonded area shall be stored in
warehouses and sites, designated by the Customs, in the bonded area.
Without the approval of the Customs, the aforesaid goods shall not be
transferred or sold.
Article 23
Transit goods, with the approval of the Customs, may undergo simple
processing in warehouses, such as grading, selecting, pasting trademark
tags, and changing the packing. The warehousing and storing enterprises
shall keep specialized account books for import, storage, transit, and
marketing, and submit periodical statements to the Customs for
verification.
Article 24
The time limit for the storage of transit goods in the bonded area shall
be one year. If, under special circumstances, there is a need to extend
the time limit, an application shall be filed with the Customs for an
extension, which shall in no way exceed one year. In the event that the
transit goods are not transported out of the bonded area within the time
limit, the Customs shall handle the case in accordance with the provisions
of Article 21 of The Customs Law of the People's Republic of China.

Chapter VI Administration of Means of Transport and Articles Carried Along by Individuals

Article 25
The persons in charge or the owners of the means of transport entering or
leaving the bonded area, or their agents, shall present the certification,
approved by the Shanghai People's Government or the competent organs
designated by it, for going through the procedures of registration for the
record.
Article 26
Means of transport, on entering or leaving the bonded area, shall declare
at the Customs, and accept the inspection by the Customs.
Article 27
Means of transport and personnel, while going from the bonded area to a
non-bonded area, shall not, without approval, transport or carry out of
the bonded area bonded goods or products made from bonded raw and
processed materials and spare and component parts.

Chapter VII Supplementary Provisions

Article 28
Cases concerning the supervision charges for goods with Customs duties
reduced or exempted, or for bonded goods imported into the bonded area,
shall be handled in accordance with Measures of the Customs of the
People's Republic of China Concerning the Collection of Customs
Supervision Charges for Goods Imported with Reduction of Exemption from
Customs Duty, and for Bonded Goods.
Article 29
It is strictly prohibited to engage in illegal activities of smuggling by
taking advantage of the preferential treatment and conveniences granted by
the State to the bonded area. The Customs shall handle the smuggling
activities which occur in the bonded area in accordance with the
provisions of The Customs Law of the People's Republic of China.
Article 30
The right to interpret these Measures resides in the General Customs
Administration. Rules for the implementation of these Measures may be
formulated by the Shanghai Customs in accordance with these Measures. The
implementation rules shall be put into effect after its approval by the
General Customs Administration.
Article 31
These Measures shall be promulgated and put into effect by the General
Customs Administration.
Note:
[*1] On September 8, 1990, the State Council, while approving the
promulgation by the General Customs Administration of these Measures, gave
the following instruction: " A special, closed channel shall be
constructed in between the bonded area of Outer Gaoqiao in Shanghai and
the wharf. The Measures shall be put into effect after the separation
installations in the bonded area have been completed, and checked strictly
and accepted by the Customs". - The Editor.



1990年9月10日

财政部关于印发《风力发电设备产业化专项资金管理暂行办法》的通知

财政部


财政部关于印发《风力发电设备产业化专项资金管理暂行办法》的通知

财建[2008]476号


各省、自治区、直辖市、计划单列市财政厅(局),新疆生产建设兵团财务局,有关中央管理企业:

  为加快我国风电装备制造业技术进步,促进风电发展,根据《中华人民共和国可再生能源法》、《国务院关于加快振兴装备制造业的若干意见》(国发[2006]8号)等,中央财政将安排专项资金支持风力发电设备产业化。为加强财政资金管理,提高资金使用效益,我们制定了《风力发电设备产业化专项资金管理暂行办法》,现印发给你们,请遵照执行。

附件:风力发电设备产业化专项资金管理暂行办法





                                           二 0 0 八年八月十一日

附件:  

  

  
  风力发电设备产业化专项资金管理暂行办法

  

第一章 总则

  第一条 根据《中华人民共和国可再生能源法》、《国务院关于加快振兴装备制造业的若干意见》(国发[2006]8号)和《可再生能源发展专项资金管理办法》(财建2006[237]号),中央财政安排专项资金支持风力发电设备产业化(以下简称产业化资金)。为加强财政资金管理,提高资金使用效益,特制定本办法。

  第二条 为引导企业研究和开发适应市场需求的产品,产业化资金采取“以奖代补”办法,主要对产业化研发成果得到市场认可的企业进行补助。

  第三条 产业化资金补助实行公开、透明原则,接受社会各方面监督。

 

 第二章  支持对象和方式

  第四条 产业化资金支持对象为中国境内从事风力发电设备(包括整机和叶片、齿轮箱、发电机、变流器及轴承等零部件)生产制造的中资及中资控股企业。

  第五条 产业化资金主要是对企业新开发并实现产业化的首50台兆瓦级风电机组整机及配套零部件给予补助,补助金额按装机容量和规定的标准确定。

  

第三章  支持条件

    第六条 申请产业化资金的风力发电设备制造企业必须符合下述条件:

  (一)设备具有自主知识产权和品牌,包括自主研发、联合开发或引进技术再创新,必须拥有完全的技术文件:包括全套设计计算文件、设计图纸、主要零部件的技术要求、工艺文件、质量控制文件等;拥有核心技术或关键技术;拥有中国商标行政管理机构核准注册的商标注册证书。

  (二)风电机组的单机容量在1500千瓦(含)以上。

  (三)风电机组通过北京鉴衡认证中心的产品认证。

  (四)风电机组配套的叶片、齿轮箱、发电机由中资或中资控股企业制造,鼓励采用中资或中资控股企业制造的变流器和轴承。

  (五)同一企业申请支持采用相同技术的不同型号产品,产品功率差在500千瓦(含)以上。

  (六)风电机组在国内完成生产、安装、调试,无故障运行240小时以上,并通过业主验收。

  

第四章  补助标准和资金使用范围

  第七条 对满足支持条件企业的首50台风电机组,按600元/千瓦的标准予以补助,其中整机制造企业和关键零部件制造企业各占50%,各关键零部件制造企业补助金额原则上按照成本比例确定,重点向变流器和轴承企业倾斜。

  第八条 产业化资金必须专项用于风电设备新产品研发的相关支出。

  

第五章  资金的申报和下达

  第九条 产业化资金由风电机组整机制造企业负责申请。整机制造企业应按要求填报风力发电设备产业化资金申请报告(格式见附1),并提供下述材料:

  (一)风电机组整机和零部件具有自主知识产权和品牌的证明文件(见附2);

  (二)北京鉴衡认证中心颁发的风电机组整机认证证书;

  (三)风电机组的购销合同、销售发票及业主出具的验收合格证明;                                

  (四)与叶片、齿轮箱、发电机、变流器及轴承等零部件制造企业签订的用于首50台风电机组制造的购销合同和销售发票;

  (五)其他需提供的材料。

  第十条 风电机组整机制造企业按属地原则,将资金申请报告及相关材料报所属省、自治区、直辖市财政厅(局),经初审后于每年9月30日前报财政部。中央直属企业于每年9月30日前直接报财政部。

  第十一条 财政部组织相关技术、市场等方面的专家,按照本办法规定的条件,对各地报送的资金申请报告进行审查。

  第十二条 财政部对经审查符合支持条件的企业,核定风电机组整机和关键零部件制造企业具体补助金额,并按规定下达预算。

  第十三条 财政部门按照财政国库管理制度有关规定将产业化资金拨付到风电机组整机和关键零部件制造企业。

  

第六章 资金监督管理

  第十四条 企业要严格按照要求填报产业化资金申请报告及相关材料,对弄虚作假的企业,财政部将扣回补助资金,并追究相关单位和人员的责任。

  第十五条 产业化资金必须专款专用,任何单位不得以任何理由、任何形式截留、挪用。对违反规定的,按照《财政违法行为处分条例》(国务院令第427号)等有关规定处理。

  

第七章 附则

  第十六条 本办法由财政部负责解释。                                                                                                        

  第十七条 本办法自印发之日起实施。

  

  

  附1:

风力发电设备产业化专项资金申请报告格式

  一、  风力发电设备产业化资金申请表(见附表)

  二、  技术研发情况

  1.产品技术来源和路线

  2.研发队伍和技术水平

  3.科研成果和专利情况

  4.产品检测认证情况

  三、产品生产情况

  1.生产设备、条件和产能

  2.主要零部件供应企业和供应数量

  3.承担的国家特许权、重大专项等项目情况

  四、市场销售情况

  1.近3年产品销售数量、销售对象和销售额

  2.国内市场占有情况和出口情况

  五、企业发展规划

  六、申请补助资金数额及主要理由

  

  

  附表


  风力发电设备产业化资金申请表


  

企业名称

企业性质


企业地址

邮编


注册资本

成立时间

主管部门


企业法人

联系人

联系电话


产品情况

(不同型号产品分别填写)


单机容量
   千瓦
生产能力
        台(套)

技术来源


专利情况


上年度

销售数量
           台(套)
上年度

销售金额
   万元

本年度

销售数量
           台(套)
本年度

销售金额
    万元

财政已补助金额
          万元
补助年度
    年

本年度申请财政补助金额
          万元
整机数量
   台(套)

本年度申请财政补助的配套零部件情况(多个供方需分别填写)
叶片供方

数量
台(套)

齿轮箱供方

数量
台(套)

发电机供方

数量
台(套)

变流器供方

数量
台(套)

轴承供方

数量
台(套)

企业法人代表签字:        (公章)







           年   月   日


财政部门审核意见:





           (盖章)



        年  月  日


  

  

  

附2:


具有自主知识产权和品牌设备的证明文件清单

  序号
  文件名称

  1
  企业法人执照副本或复印件;若属中外合资企业,应提供在工商管理部门注册登记的股权结构;

  2
  关于产品技术来源(自主研发、联合开发和引进技术再创新)情况的有效证明文件;

  3
  产品的注册商标证书;

  4
  关于产品知识产权权益状况的有效证明文件。涉及多个单位的,应提交与产品技术归属及权限有关的技术转让、许可、授权、合作生产、合作开发的合同或协议。

关于修改《深圳市建设工程质量管理条例》的决定

广东省深圳市人大常委会


关于修改《深圳市建设工程质量管理条例》的决定


(2004年6月25日深圳市第三届人民代表大会常务委员会第三十二次会议通过)
(2004年7月29日广东省第十届人民代表大会常务委员会第十二次会议批准)

  深圳市第三届人民代表大会常务委员会第三十二次会议审议了深圳市人民政府关于提请审议《〈深圳经济特区劳务工条例〉等28件法规的修正案》的议案。为贯彻实施《中华人民共和国行政许可法》,决定对《深圳市建设工程质量管理条例》作如下修改:一、删除第十六条。

  二、删除第十九条第一款中的“办理工程质量监督手续,并”字样和第二款中的“质量监督和”字样。

  根据本决定对部分条文的顺序及其引用条文的序号作相应的调整。本决定自公告之日起施行。